Search Site

Flexslice16-Out PNP Module

Flexslice Modules


  • Use with Trio or 3rd Party EtherCAT Masters
  • High performance, flexible topology and simple configuration.
  • Bus cycle time synchronised with Motion Coordinator Servo Period.
  • Bus coupler module with 2 x RJ45 Ethernet ports for EtherCAT connection.
  • EtherCAT protocol remains fully intact down to individual modules using the E-bus system.
  • I/O functions tightly synchronised to motion using EtherCAT distributed clocks.
  • Automatic mapping to the Motion Coordinator I/O system.
  • DIN rail mounted.
  • Multiple practical push-in connector options – No break outs required.
  • Clip-together design with ‘quick release’ locks for mechanical integrity.
  • User labelling facility
  • Machine builder custom functionality options

P371The P371 digital output slice connects the binary control signals from the Motion Coordinator to the machine’s output devices at 24V DC.

All 16 outputs are current sourcing (PNP) type and have electrical isolation. Outputs and power connection are via 2 x single-row plug-in screw terminal blocks. The Flexslice module indicates the output signal states via LEDs.

P371 Flexslice 16-Out PNP
Module current consumption (EBUS 5V) 110mA max
Number of Digital Outputs
16 (2 banks of 8)
Power supply requirement
24V (+/-20%) DC
Load type
Resistive, inductive and capacitive
"ON" time 110us (10% to 90%)
"OFF" time
210us (90% to 10%)
Max. Output current
0.5A per channel

4A per bank of 8 Outputs
Short−Circuit Protection
1.4A typ per output
Over voltage Protection
Reverse Voltage Protection Yes
Power Supply 24V / 1.5W
Isolation 1KV
Mounting DIN rail mount
Size (w x d x h) mm 15 x 147 x 107
Weight 145g
Connectors Push-in wiring terminals
EMC EN61000-6-2 (2005) Industrial Noise Immunity/ EN61000-6-4 (2007) Industrial Noise Emissions.
RoHs, CE, UL Compliant
Data Sheet All Flexslice Modules
Quick Start Guide Simple set up guide
EMC Guide Electromagnetic Compatibility guide for Trio products

Fieldbus Data CanOpen EDS files for Trio CAN IO modules P317, P318, P319, P326 and P327

Package Drawings

Drawings are available in the following formats: DXF, IGES, DWG, STEP and SolidWorks.
These files are included in the Zip file below.
Download Zip file  


The Technical Reference Manual can be downloaded in full or as separate sections. All in PDF format
I-O Expansion Modules (Chapter 4) (1.8Mb)  


EU Declaration of Conformity