The Flexslice system begins with the coupler.
The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand.
One station consists of a P366 coupler and up to 16 Flexslice EtherCAT modules. The coupler converts the passing telegrams from Ethernet 100BASE-T to E-bus signal format.
In the EtherCAT network, the P366 coupler can be installed in any position in the Ethernet string; making it suitable for operation close to the master or at a remote position.
|Power supply requirement
||24V DC, 0.8A min for full system|
|Data rate||100 Mbit/s
|Power Supply||24V / 1.5W|
|EtherCAT refresh cycle
|Network Cable||CAT5e min|
|Mounting||DIN rail mount|
|Size (w x d x h) mm||17.2 x 147 x 107|
|Connectors||Push-in wiring terminals|
|EMC||EN61000-6-2 (2005) Industrial Noise Immunity/ EN61000-6-4 (2007) Industrial Noise Emissions.|
|RoHs, CE, UL||Compliant|
|Data Sheet||All Flexslice Modules|
|Quick Start Guide||Simple set up guide|
|EMC Guide||Electromagnetic Compatibility guide for Trio products|
|TRIO_P3xx.zip||CanOpen EDS files for Trio CAN IO modules P317, P318, P319, P326 and P327|
|Drawings are available in the following formats: DXF, IGES, DWG, STEP and SolidWorks.
These files are included in the Zip file below.
|Download Zip file|
|The Technical Reference Manual can be downloaded in full or as separate sections. All in PDF format|
|I-O Expansion Modules (Chapter 4) (1.8Mb)|
|EU Declaration of Conformity|